Installation Instructions
INSTALL WALL PLATE
Select one of the following options to install the wall plate:
•Lag Bolt Installation Instructions (Option A)
•Concrete Installation Instructions (Option B)
•Steel Stud Wall Installation Instructions (Option C)
Lag Bolt Installation Instructions (Option A)
Install the wall plate as follows:
WARNING: It is the responsibility of the installer to verify that the structure to which the mount is anchored will safely support five times the combined load of all attached components and equipment.
1.Determine a suitable mounting location and lift the wall plate (10) into place (refer to “WALL MOUNT PLATE PARTS” on page 3).
2.Using a small nail or screw (not provided) in the center hole, lightly support the wall plate at the mounting loca- tion.
3.Level the wall plate (10) and drill pilot holes for anchoring the wall plate. If drilling into wood studs, use a 15/64” drill bit.
4.Using four 5/16” lag bolts (80) and 5/16” washers (90), install the wall plate on the wall.
5.Slide the latches to the outside.
Figure 3. Lag Bolt Installation
5
