Installation Instructions |
|
| MSS6000 | ||
1 | Remove bolt |
|
|
| |
| or padlock | 2 |
| Height Adjustment | |
| if used | 5" Max. | |||
| Screws | ||||
|
|
| |||
|
|
|
| (2 each side) | |
Pin in |
|
|
| ||
"Closed" |
|
|
| ||
position - |
|
|
| ||
move to |
|
|
| ||
"Open" |
|
|
| ||
position to |
|
|
| ||
remove |
|
|
| ||
display |
|
|
| ||
| 4 |
|
|
| |
|
|
| Figure 8 |
| |
|
| Display Roll Adjustment |
| ||
Pin in | The | ||||
for the purpose of leveling the display. | |||||
"Open" | To level the display: |
| |||
position - |
| ||||
move to | 1. | Loosen upper and lower roll adjustment nuts. | |||
"Closed" | |||||
| (See Figure 9) |
| |||
position |
|
| |||
2. | Level display. (See Figure 9) |
| |||
after display |
| ||||
is removed. | 3. | Tighten roll adjustment nuts. |
| ||
|
|
|
Figure 7
ADJUSTMENTS
Display Height Adjustment
CAUTION: Displays are fragile. Allowing the display to drop to bottom of stand may result in damage to the display.
1.While holding the display, loosen the four height adjustment screws. (See Figure 8)
CAUTION: Make sure all cables and wires are not pinched when raising or lowering display.
2.Position display at the desired height.
3.Tighten four height adjustment screws. (See Figure 8)
7