Installation Instructions | MSA/MTA Series |
3d |
3e |
Knobs to outside |
of brackets |
Center Line (CL)
Pullstraps |
NEVER place both interface brackets to one side of the wall mount center line (CL)!
Figure 7
Attaching Screen to Wall Mount
1. Adjust Velcro® pull strap (if necessary) so it does not extend beyond bottom of screen. (See Figure 8)
NOTE: Do NOT allow both interface brackets to be located on same side of wall bracket. (See Figure 8)
NOTE: NEVER place both interface brackets to one side of the wall mount center line! (See Figure 8)
Both interface brackets must NEVER be located to one side of the wall brackets!
Figure 8
2. Hang top hook of interface brackets onto the top bar of the mount. (See Figure 9)
NOTE: The screen initially installs into the "kickstand mode" to allow easy cable access.
3. Slide screen and bars to desired viewing position.
4. Route cables between wall and bars.
CAUTION: PINCH POINTS! Keep fingers, hands and cables out of pinch point areas.
9
