PNRIW / PNRIWU | Installation Instructions |
|
|
From Display |
| 2 |
|
|
| x 4 | (A) x 1 |
| 3 |
| |
| 1 |
| |
|
|
| |
|
| 4 | 3 |
|
|
| 2 |
|
| From Display |
|
|
| (M) x 4 |
|
Figure 7
Adjustments
TENSION ADJUSTMENTS
Pitch Tension Adjustment
1.With display mounted, check for desired Pitch tension.
2.If required, adjust the Centris SelectTM knob right or left until desired Pitch tension is obtained. (See Figure 8)
3.To lock the mount at the desired position, tighten the Pitch locking screw. (See Figure 9)
Centris SelectTM |
Pitch Adjustment Knob |
2 |
Figure 8
Pitch | 3 |
Locking Screw |
|
Figure 9
Roll Tension Adjustment
CAUTION: IMPROPER INSTALLATION CAN LEAD TO SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT!Overtightening lateral adjustment will cause excessive wear and may distort adjustment components.
1.Using a 9/16” wrench (not provided), slightly tighten or loosen lateral Roll tension adjustment nut. (See Figure 10)
2.Mount the display and check for desired roll tension.
3.Repeat Steps 1 and 2 until desired Roll tension is obtained.
6
