Chief Manufacturing RSM A-D installation instructions RSM Installation, Threaded Pipe Installation

RSM Elite Series Projector Mounts Installation Instructions

1	(not included)	RSM INSTALLATION
		NOTE: Models RSM-A/RSM-B/RSM-C/RSM-D are
		identical EXCEPT each provides a different
		keyed lock.
		Threaded Pipe Installation
		1. Carefully determine required mounting location.
(not included)	2	IMPORTANT ! : This will require knowing the lens
		to screen distance. See projector specifications
	4	for details on determining this distance.
		2. Install 1-1/2" NPT or NPSM following ANSI/ASME
		B1.20.1 (Schedule 40, 0.154" minimum thickness
	3	aluminum - ASTM B221) threaded extension
		column (not included) into threaded collar until
		tight, with a minimum of four threads engaged.
		WARNING: IMPROPER INSTALLATION CAN
		RESULT IN SERIOUS PERSONAL INJURY OR
		DAMAGE TO EQUIPMENT! Structural members
		MUST be capable of supporting five times the
		combined weight of all equipment being mounted.
	(A)	3. Align RSM with end of NPT pipe.
		4. Thread RSM up onto pipe by turning until hand
		tight.
	2	Rough Alignment of RSM
		1. Turn RSM clockwise or counter-clockwise until
		front of mount is facing target.
	1	2. Secure RSM to pipe by turning set screw until tight.
(A)		CAUTION: DO NOT OVERTIGHTEN! Over
		tightening of setscrew can damage threads on pipe.
		3. Turn security screw using a Phillips screwdriver
		until set screw cannot be seen through access hole
		in RSM.
		3
1
	(bottom view)
6