PREPARATION
LENS INSTALLATION
Before setting up a projector, install Projection Lens on Projector.
1.Before installation, check where a projector is used and prepare suitable lens. For specifications of a Projection Lens, refer to manual separately attached or contact sales dealer where you purchased a projector.
2.For installation, refer to installation manual supplied to a Projector.
When moving or setting up a projector, be sure to replace Lens Cover to protect surface. And be careful not to hold or subject lens to strong forces. It may damage lens, cabinet, or mechanical parts.
POSITIONING PROJECTOR
This projector is designed to project on a flat projection
surface.
SCREEN
ROOM LIGHT
Brightness in a room has a great influence on picture quality. It is recommended to limit ambient lighting in order to provide best image.
VENTILATION
This projector is equipped with cooling fan to protect it from overheating. Pay attention to following to ensure proper venti- lation and avoid a possible risk of fire and malfunction.
●Do not cover vents with papers or other materials.
● Keep rear grill at least 3 feet (1 m) away from any object.
●Make sure that there are no objects under a pro- jector. An object under a projector may prevent a projector from taking cooling air through bottom vent.
AIR INTAKE VENT | EXHAUST VENT |
(BOTTOM SIDE) | (FRONT AND REAR SIDE) |
|
|
LENS SHIFT ADJUSTMENT
Projection lens can be moved up and down with
Use LENS SHIFT button and POINT UP/DOWN button to move image up or down.
(Refer to page 22.)
MOVED UP OR DOWN
9
