Chromalox DS-50600 installation instructions PG436-2, General, 161-304901-004, Date June

Chromalox®

DIVISION 4

SECTION VTS

SALES	PG436-2
REFERENCE (Supersedes PG436-1)
	161-304901-004
DATE JUNE, 2010

DS-50600, STAR-GF, STAR-TIP and STAR-TG Kits

For Adding Optional Kits to STAR Radiant Heaters

Model DS50600	Model STAR-TIP	STAR-GF
	STAR-TG

Always check to make certain the voltage rating of the kit matches the voltage rating of the heater (See Nameplates).

ELECTRIC SHOCK HAZARD. Disconnect all power to heater before installing or servicing kit(s). Failure to do so could result in personal injury or property damage. Kit(s) must be installed by a qualified person in accordance with the National Electrical Code, NFPA 70.

GENERAL

To use this instruction sheet from Table 1 select the Installation Instructions by matching the Kit Model to the Heater Model. If a match does not exist consult Factory.

Table 1

The kits are add-on options to STAR Radiant Heaters. The installation and renewal parts identification for the heater is cov- ered in the instruction sheet provided with the heater. SAVE

BOTH COPIES OF THE INSTRUCTION SHEET.

Kit Model	Used with Heater Model	Kit Function	Installation Instructions	Wiring Diagram
DS-50600	Fixed STAR-06A and STAR-14A	Adds Integral Disconnect Switch	See Page 2	Fig. 1
DS-50600	Portable STAR-06A and STAR-14A	Adds Integral Disconnect Switch	See Page 3	Fig. 1
STAR-GF	All Fixed STAR	Adds Wall Mounted Ground Fault Sensor	See Page 4	Fig. 2
STAR-TIP	Portable STAR-06A and STAR-14A	Adds Tip Over Shut Down	See Page 5	Fig. 3
STAR-TG	Portable STAR-06A and STAR-14A	Adds Tip Over Shut Down with Ground Fault Sensor	See Pages 5 and 6	Fig. 4

© 2008 Chromalox, Inc.