![](/images/new-backgrounds/1022152/2215241x1.webp)
Tr o u b l e s h o o t i n g
PROBLEM | CAUSE/REMEDY | |
|
| |
|
| |
Nothing happens, all displays are | The mains plug has not been inserted (don't laugh - | |
dark. | check it out!) | |
| There is no mains voltage. Check that the socket used | |
| carries current (e.g. by means of a lamp). | |
| The receiver is not switched on. | |
|
| |
Only the POWER LED is alight. | The receiver is in standby mode. Press the STANDBY key | |
on the remote control. | ||
| ||
|
| |
The system does not respond to | Check that no objects block the way between remote | |
the remote control. | control and receiver. Replace the remote control | |
| batteries. | |
|
| |
Systemet leverer ingen lyd. | The cable connections of the speaker terminals are | |
| loose or have no contact. Press the TEST key on the | |
| remote control. | |
|
| |
No sound on the digital input. | Check the setup settings. Set the DVD player in the | |
Setup menu. Set Audio out to the data format RAW or | ||
| ||
| bitstream. Check the digital input connected and select | |
| it. | |
|
| |
The receiver does not receive the | Check that the indoor antenna is correctly positioned and, | |
radio station properly. | if the house connection is used, check that the signal is | |
| correct. Check the cable for fracture. | |
|
| |
No reproduction of TV signals or | Check the SCART connection, that the SCART cable is | |
fully mounted and that SCART IN/OUT has been | ||
incorrect reproduction. | ||
selected on the television set. | ||
| ||
|
| |
No reproduction of analogue | Check that that the RCA plugs are correctly inserted into | |
signals through AUX or incorrect | the inputs, that AUX 1 / AUX 2 have been properly | |
reproduction. | selected, and that the speaker volume is not set at 0 for | |
| reproduction of portable devices (CD/MP3/MiniDisc | |
| players) | |
|
|
We reserve the right to change the technical data and design without notice as a result of further development.
21