Product Description
2
Cisco 10005 ESR AC Power Supply Installation
78-12652-01
Product Description
The AC power supply (Figure1) provides power conversion directly from the
facility AC input power (100 to 240 VAC nominal) to the –48V VDC used
internally by the system. Power is delivered to the power supply by the AC power
cord. The AC power supply is provided with an IEC 320/C20 AC inlet, rated
16A/250V (20A in North America).
Figure1 AC Power Supply
The Cisco 10005 chassis has two compartments for power supplies. The chassis
can operate with a single power supply; install two power supplies if you need
power redundancy.
Prerequisites and Preparation
Before you perform any of the procedures in this guide, we recommend that you:
Read the safety guidelines in the next section and review the electrical safety
and ESD-prevention guidelines in the Cisco 10005 ESR Hardware
Installation Guide.
Ensure that you have all of the necessary tools and equipment (see the
“Required Tools and Equipment” section on page 6).
53616
CAUTION
THIS UNIT HAS MORE THAN ONE POWER
SUPPLY CORD. DISCONNECT TWO (2)
POWER SUPPLY CORDS BEFORE
SERVICING TO AVOID ELECTRIC SHOCK.
CAUTION
POWER
FAULT
100-240V
50/60 HZ
15-7A