Cisco Systems 100 Series Agency Approvals, FCC Part 68 Notice

Regulatory Compliance and Safety Information for Cisco SB 100 Series Routers

78-16777-01

Agency Approvals

Table 1 lists the safety and electromagnetic interference (EMI) standards that apply to the Cisco SB 100

series routers.

Table 2 lists the agency approvals of telecom standards that apply to the Cisco SB 100 series routers.

FCC Part 68 Notice

This equipment complies with Part 68 of the FCC rules and the Technical Requirements for Connection

to the Telephone Network published by ACTA. On the bottom of the this equipment is a label that

contains, among other information, a product identifier in the format US:5B1MFNA0013. If requested,

this number must be provided to the telephone company.

If this equipment causes harm to the telephone network, the telephone company will notify you in

advance that temporary discontinuance of service may be required. If advance notice is not practical, the

telephone company will notify the customer as soon as possible. Also, you will be advised of your right

to file a complaint with the FCC if you believe it is necessary.

The telephone company may make changes in its facilities, equipment, operation, or procedures that

could affect the operation of this equipment. If this happens, the telephone company will provide

advance notice in order for you to make the necessary modifications to maintain uninterrupted service.

If you have trouble with this equipment, please contact Cisco Systems for repair and warranty

information. If the trouble is causing harm to the telephone network, the telephone company can request

that you remove the equipment from the network until the problem is resolved.

Normally, this equipment will be used in conjunction with FCC approved equipment that limits the

Encoded Analog Content that provides the required Billing Protection.

Cisco SB 100 series routers that bear the labeling identification number US:5BMFMAM0013 comply

with the following requirements:

•FCC Rules and Regulations 47 CFR Part 68

Table 1 Safety and EMI Standards for the Cisco SB 100 Series Routers

Safety Standards EMI Standards

UL 60950, CSA 60950 CFR47 part 15 subpart B, 2000 class B

IEC, EN 60950:1992 with

Amendments A1 through A4 and

A11, AS/NZ5 3260

EN55022, EN550: EN61000 series

Table 2 Telecom Standards for the Cisco SB 100 Series Routers

Telecom Standards

FCC part 68/TIA 968

CS-03, III, VIII

Directive 1999/5/EC, CTR3

JATE, NTT

TS013, TS031

PTC 231