Description, Speciﬁcations | Cisco Systems Catalyst 8510, 1010

Speciﬁcations and Regulatory Compliance Information

Description	Speciﬁcations
Switch and processor	10-Gbps shared memory, nonblocking switch fabric up to 32
capacity	KB frames

Dimensions (H x W x D)	Chassis: 10.4 x 17.25 x 18.4 in (26.4 x 43.1 x 46.0 cm)
	Processor card and carrier module:
	1.2 x 14.4 x 16 in (3.0 x 36.6 x 40.6 cm)
	Port adapter: 1.2 x 6.5 x 10 in (3.0 x 16.5 x 25.4 cm)
	Power supply: 2.7 x 6.0 x 15.3 in (6.9 x 15.2 x 38.9 cm)

Weight	Empty chassis: 32 lb (15.5 kg)
	Fully populated chassis: approximately 130 lb (59.09 kg)
	AC power supply: 11 lb (4.98 kg)
	DC power supply: 10 lb (4.54 kg)

Airﬂow	95 cfm through the system fan assembly

Operating temperature	32 to 122°F (0 to 50°C)

Nonoperating temperature	–40 to 167°F (–40 to 75°C)

Humidity	10 to 90%, noncondensing

Altitude	–500 to 10,000 ft (–52 to 3048 m)

Microprocessor	100-Mhz MIPS R4700

AC total output	388W maximum

AC-input voltage	100-240 VAC wide input with power factor correction

AC frequency	Auto sensing limits: 100 to 127/200 to 240 VAC, 8/4A, 47 to
	63 Hz

AC current rating	8/4A with the chassis fully populated

Power supply load	376W maximum conﬁguration, 200W typical with max
	conﬁguration

DC voltages supplied and	System:	+5V @ 70A
steady-state maximum		+12V @ 2A
current ratings		+24V @ 0.2A
	Processor:	+5V @ 15A
		+24V @ 25mA
		+12V @ 500mA

Description	Speciﬁcations
Memory	8-MB Flash memory SIMM (upgradable to 16 MB)
	64-MB DRAM
	256-KB boot EPROM
	128-KB SRAM
	No Flash PC card installed by default (accepts 8-, 16-, or
	20-MB Intel Series 2+ Flash PC cards)

Regulatory Compliance	UL 1950 (U.S.A.)
	CSA 950 (Canada)
	EN60950 (European Union)
	IEC 950 (International)
	AS/NZS 3260 (Australia/New Zealand)
	TS001:1997 (Australia)
	21CFR1040 (Laser - U.S.A.)
	EN60825 (Laser - European Union)
	IEC60825 (Laser - International)
	CE Marking (European Union)
	FCC Part 15 (CFR 47) Class A (U.S.A.)
	VCCI Class A with UTP and Class B with FTP cables (Japan)
	EN55022 Class A with UTP and Class B with FTP cables
	(European Union)
	CISPR 22 Class A with UTP and Class B with FTP cables
	(International)
	AS/NZS 3548 Class A with UTP and Class B with FTP cables
	(Australia/New Zealand)