Chapter1 Product Overview
System Modules
1-38
Cisco Metro 1500 Series Hardware Installation Guide
78-10588-03
TheTDM4E channel modules are double width. A maximum of four modules
can be placed in one chassis.
Network Element Management Interface
The NEMI is a two-slot plug-in module that can be configuredby software to be
either a NEMI-master or a NEMI-slave. The NEMI resides in the following
chassis: in the primary chassis (Figures 2-3 and 2-4), chassis B (Figure 2-6),
chassis D, and chassis F. This interface provides status and configuration
capabilities.
A management computer can be connected directly to the NEMI when using a
serial LapLink cable or a crossover Ethernet cable. Ethernet networks with more
than two computers require an Ethernet hub. The NEMI functions under version
2.0.35 of the Linux operating system.The NEMI module provides the following:
Connection to the network using standard Internet protocols
Remote management and configuration of all interconnected chassis
SNMP monitoring and trap generation
Systems with 24 to 32 channels require the installation of a second NEMI module
in extension chassis B. When the two NEMI modules are interconnected using an
inter-NEMI network connection (INNC), one NEMI module is configuredas the
NEMI-master, while the second is configured as the NEMI-slave.
Note The NEMI-master and the NEMI-slave are physically identical
modules and differ only in software configuration.