Cisco Systems 1750 Unpacking the Router, Additional Required Equipment

Cisco 1750 Router Hardware Installation Guide

78-6169-02

Unpacking the Router

Table 1-5 lists the items that come with your router. All these items are in the

accessory kit that is inside the box that your router came in.

Additional Required Equipment

Depending on your local network and which Cisco WICs and VICs you install in

your router, you might need other items listed in Table 6 to complete your router

installation.

Table 1-5 Router Box Contents

•Power cord (black)

•Power supply

•DB-25 to DB-9 adapter

•Console cable, RJ-45 to DB-9 (light blue)

•Product documentation

Table 6 Additional Required Equipment

Equipment When You Use It

Ethernet hub A hub connects pieces of network equipment (including the router)

to create a network. You can use a 10-, 100-, or 10/100-Mbps hub

with the router.

Ethernet switch A switch connects pieces of network equipment (including the

router) to create a network. You can use a 10-, 100-, or 10/100-Mbps

switch with the router.

Phillips screwdriver Although the WICs and VICs use thumbscrews, you might need a

Phillips screwdriver to loosen the WIC and VIC cover.

Cisco WIC To make a WAN connection, the router must have a supported WIC

installed. The router supports up to two cards. You can either order

the cards when ordering the router, and they will be installed for

you, or you can order the cards separately, after receiving the router,

and install them yourself.