Cisco Systems 1750 Rear-Panel Ports and LEDs

Rear-Panel Ports and LEDs
iv
Cisco 1750 Router Hardware Installation Guide
78-6169-02
Rear-Panel Ports and LEDs
This section describes the router rear-panel ports and LEDs, which are shown in
Figure 2 and described in Table 2 and Table 3.
Figure 2 Rear-Panel Components and LEDs
Table 2 Rear-Panel Connectors
Connector/Slot Label/Color Description
Ethernet port 10/100-Mbps
ETHERNET
(yellow)
Router connection to the local Ethernet network. This
port autosenses the speed (10 or 100 Mbps) and duplex
mode (full or half) of the device to which it is connected
and then operates at the same speed and in the same
duplex mode.
Auxiliary port AUX
(black)
Modem connection for remote configuration using
Cisco IOS software.
Console port CONSOLE
(light blue)
Terminal or PC connection for local configuration using
Cisco IOS software.
+5, +12, -12 VDC
CONSOLE
AUX
Cisco 1750
10/100 ETHERNET
SLOT 2
SEE MANUAL BEFORE INSTALLATION
1
IN USE
VIC
2FXO
PVDM OK
SLOT 1
SLOT 2 OKFDXSLOT 0 OKSLOT 1 OK 100 LINK
THIS SLOT ACCEPTS ONLY VOICE INTERFACE CARDS
SLOT 0
Power
socket
Power switch
17469
FDX/100/LINK LEDs
Auxiliary port
Kensington-compatible
locking socket
WIC/VIC
slot 1
10/100-Mbps
Ethernet port
PVDM
OK LED
Slot 0
OK LED
Slot 1
OK LED
WIC/VIC
slot 0
Ground
wire
Console port
Slot 2
OK LED
0
IN USE
SEE MANUAL BEFORE INSTALLATION
1
IN USE
VIC
2FXS
0
IN USE
VIC
slot 2