v
Cisco 1750 Router Hardware Installation Guide
78-6169-02
Rear-Panel Ports and LEDs
Use the rear-panel LEDs during router installation to confirm that you have
correctly connected all cables to the router.
WIC/VIC slot SLOT 0 Supports either a Cisco WIC or VIC. For detailed
information, refer to the Cisco WAN Interface Cards
Hardware Installation Guide that comes with every
card.
WIC/VIC slot SLOT 1 Supports either a Cisco WIC or VIC. For detailed
information, refer to the Cisco WAN Interface Cards
Hardware Installation Guide that comes with every
card.
VIC slot SLOT 2 Supports one Cisco VIC. For detailed information, refer
to the Cisco WAN Interface Cards Hardware
Installation Guide that comes with every card.
Power socket +5, +12, –12
VDC
Router connection to the external power supply.
Protective earth Ground wire Router connection to earth ground by using a green and
yellow 14 AWG ground wire.
Table 2 Rear-Panel Connectors (continued)
Connector/Slot Label/Color Description
Table 3 Rear Panel LEDs
LED Label Color Description
FDX Green On—Ethernet port is operating in full-duplex mode.
Off—Ethernet port is operating in half-duplex mode.
100 Green On—Ethernet port is operating at 100 Mbps.
Off—Ethernet port is operating at 10 Mbps.
LINK Green On when the Ethernet link is up.
SLOT 0 OK Green On when either a WIC or VIC is correctly inserted in the
card slot.
SLOT 1 OK Green On when either a WIC or VIC is correctly inserted in the
card slot.