Cisco Systems 1750 Front-Panel LEDs

Front-Panel LEDs
vi
Cisco 1750 Router Hardware Installation Guide
78-6169-02
Front-Panel LEDs
Use the router front-panel LEDs to determine network activity and status on the
Ethernet port and on the WIC and VIC ports. The front-panel LEDs are illustrated
in Figure 3 and described in Table 4.
Figure 3 Front-Panel LEDs
SLOT 2 OK Green On when a VIC is correctly inserted in the card slot.
PVDM OK Green On when a packet voice data module (PVDM) is
correctly inserted in the card slot.
Table 3 Rear Panel LEDs (continued)
LED Label Color Description
17470
PWR
ETH
ACT
PORT0
PORT1
PORT1
OK
PORT0
SLOT1
PORT0
SLOT0 SLOT2
PORT1 COL
Table 4 Front-Panel LEDs
LED Color
Cards
Supported LED Meaning
PWR Green – On when DC power is being supplied to the router.
OK Green – On when the router has successfully booted up and the
software is functional. This LED blinks during the
power-on self-test (POST).
Refer to the “OK LED Diagnostics” section in the
“Troubleshooting” chapter for information on how to use
this LED for router diagnostics.
ETH