AppendixC Installing and Upgrading Memory and Packet Voice Data Modules
Closing the Chassis
C-10
Cisco 1760 Modular Access Router Hardware Installation Guide
78-13342-03
Closing the Chassis
After installing memory or data modules on the motherboard, close the chassis by
following these steps:
Step1 Slide the top cover of the router back on the bottom of the chassis by pushing it
in the opposite direction from that shown in FigureC-2, “Removing the Top
Cover of the Router,” on page C-3.
Step2 Replace the screws that you removed when you opened the chassis. (See
Figure C-1, “Removing the Cisco 1760 Chassis Screws,” on page C-3.)