Cisco Systems 2600 Call Time Display, User, Receiving, Caller-ID Information Received, VC-813

Caller ID on Cisco 2600 and 3600 Series Routers and Cisco MC3810 Multiservice Concentrators

Caller ID Overview

Table 56 Caller-ID Information Received

User	User
Originating	Receiving
Call	Call	Caller-ID Information Received
A	D	D receives the caller ID of the PSTN subscriber line only (408 555-1111).
D	A	A receives the calling number and name of D, provided that the PSTN
		subscriber line (408 555-1111) is enabled for Caller ID.
D	B	B receives the calling number and name of D, provided that the PSTN
		subscriber line (408 555-1111) is enabled for Caller ID.
B	D	D receives the caller ID of the PSTN subscriber line only (408 555-2222).
B	E	E receives the Calling Number and Name string of B.
B	G	G receives the Calling Number and Name string of B.
E	B	B receives the Calling Number and Name string of E.
F	C	C receives the Calling Number of F.
C	F	Calling Number of C.
D	C	C Receives Calling Number of D through ANI.
C	D	Calling Number of C goes through ANI to the PSTN. However, the PSTN
		displays only the trunk ID, so D sees only this information.
C	F	The information that F receives depends on the PBX features available.

Call Time Display

When caller-ID information is sent, the local time set on the router is transmitted with the station name and number. If a call received on an FXO port is terminated on an FXS port, the calling time received on the FXO port is replaced by the local time while transmitting caller ID to the FXS port. This is also true for calls received from the network. The router should be configured to retrieve network time at boot up from an NTP server in order to maintain the correct local time setting.

For more information about voice configuration, refer to the following:

•Cisco IOS IP Routing Configuration Guide

•Cisco IOS Wide-Area Networking Configuration Guide

The following online feature documentation and installation guides describe the configuration and installation of hardware components:

•For information about installing Cisco MC3810 multiservice concentrators, see Cisco MC3810 Multiservice Concentrator Hardware Installation at the following location: http://www.cisco.com/univercd/cc/td/doc/product/access/multicon/3810hwig/index.htm

•For information about installing Cisco 2600 series routers, see the documents listed at the following location: http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis2600/index.htm

•For information about installing Cisco 3600 series routers, see the documents listed at the following location: http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis3600/index.htm

Cisco IOS Voice, Video, and Fax Configuration Guide

VC-813