8-7
Catalyst 2940 Switch Software Configuration Guide
78-15507-02
Chapter8 Configuring 802.1X Port-B as ed Authentication Configuring 802.1X Authentication
Retransmission time 30 seconds (number of seconds that the switch should
wait for a response to an EAP request/identity frame
from the client before resending the request).
Maximum retransmission number 2 times (number of times that the switch will send an
EAP-request/identity frame before restarting the
authentication process).
Host mode Single-host mode.
Guest VLAN None specified.
Client timeout period 30 seconds (when relaying a request from the
authentication server to the client, the amount of time the
switch waits for a response before resending the request
to the client.
Authentication server timeout period 30 seconds (when relaying a response from the client to
the authentication server, the amount of time the switch
waits for a reply before resending the response to the
server. This setting is not configurable.)
Table8-1 Default 802.1X Configuration (continued)
Feature Default Setting