Cisco Systems 2940 Overriding the CoS Priority of Incoming Data Frames, Configuring the IP Phone to Trust the CoS Priority of Incoming Data Frames

15-5

Catalyst 2940 Switch Software Configuration Guide

78-15507-02

Chapter15 Configuring Voice VLAN Configuring Voice VLAN

Overriding the CoS Priority of Incoming Data Frames

You can connect a PC or other data device to a Cisco 7960 IP Phone port. The PC can generate packets

with an assigned CoS value. You can configure the switch to override the priority of frames arriving on

the IP phone port from connected devices.

Beginning in privileged EXEC mode, follow these steps to override the CoS priority received from the

nonvoice port on the Cisco 7960 IP Phone:

Use the no switchport priority extend interface configuration command or the switchport priority

extend cos 0 interface configuration command to return the port to its default setting.

Configuring the IP Phone to Trust the CoS Priority of Incoming Data Frames

You can connect a PC or other data device to a Cisco 7960 IP Phone port. The PC can generate packets

with an assigned CoS value. You can configure the switch to trust the priority of frames arriving on the

IP phone port from connected devices.

Beginning in privileged EXEC mode, follow these steps to trust the CoS priority received from the

nonvoice port on the Cisco 7960 IP Phone:

Command Purpose

Step1 configure terminal Enter global configuration mode.

Step2 interface interface-id Enter interface configuration mode, and specify the interface connected to

the IP phone.

Step3 switchport priority extend

cos value Set the IP phone access port to override the priority received fro m t he PC or

the attached device.

The CoS value is a number from 0 to 7. Seven is the highest priority. The

default is 0.

Step4 end Return to privileged EXEC mode.

Step5 show interfaces interface-id

switchport Verify your entries.

Step6 copy running-config startup-config (Optional) Save your entries in the configuration file.