2-12
Catalyst 3750-E and Catalyst 3560-E Switch Hardware Installation Guide
OL-9774-03
Chapter 2 Switch Installation
Installing the Switch
Attaching the Rack-Mount Brackets
To install the switch in a rack, you must first remove the screws from the switch chassis so that the
mounting brackets can be attached. For attachment at the front-mounting position, remove two Phillips
truss-head screws from the switch side panels (Figure 2-10). For some switch models, remove only one
screw from the side panels. For attachment at the mid-mounting position, remove one screw. For
attachment at the rear-mounting position, remove one or two screws depending on the switch model.
Figure 2-10 Removing Screws from the Switch
157546
49
51
X2-1
X2-2
50
52
41 42 43 44 45 46 47 48
47X
48X
Catalyst 3750-E
SERIES
PoE-48