Warning

Only trained and qualified personnel should be allowed to install, replace, or service this

 

equipment. Statement 1030

 

 

Caution To comply with the Telcordia GR-1089 Network Equipment Building Systems (NEBS) standard for electromagnetic compatibility and safety, connect the Ethernet cables only to intrabuilding or nonexposed wiring or cabling.

Note The grounding architecture of this product is DC-isolated (DC-I)

Before Attaching the Brackets

To install the switch in a rack, you must first remove the screws from the switch chassis so that the mounting brackets can be attached. For attachment at the front-mounting position, remove two Phillips truss-head screws from the switch side panels. For attachment at the mid-mounting position, remove one screw. For attachment at the rear-mounting position, remove two screws.

41

42

43

44

46

 

45

Catalyst 3750-E

47

SERIES

48

47X 49

X2-1 X2-2

51

48X PoE-48

50

52

157633

16

Page 16
Image 16
Cisco Systems 3750E-48PD-F manual Before Attaching the Brackets