Cisco Systems 3911 Connecting Your Phone

Connecting Your Phone

This section shows and explains the connectors on your Cisco IP phone.

Adjusting the Handset Rest

When you connect your phone, you can adjust the handset rest so that the receiver does not slip out of the cradle. Use the

following method to adjust the handset:

1. Set the handset aside and pull the square plastic tab from the handset rest.

2. Rotate the tab 180 degrees.

3. Slide the tab back into the handset rest. An extension protrudes from the top of the rotated tab. Return the handset to the

handset rest.

1Network port (10/100 SW)

2Handset port

3DC adapter port (DC48V)

4AC-to-DC power supply

5AC power cord

80259

1 2 3

20521

Contents

Main 1 Physical Layout Page Connecting Your Phone Adjusting the Handset Rest 1 2 3 4 5 2 Hold and Resume Mute Switching Between Multiple Calls Switch From a Connected Call to Answer a Ringing Call on the Same Line Switch From a Connected Call to Answer a Ringing Call on the Other Line Viewing Multiple Calls Transferring Calls Transfer a Call Without Talking to the Transfer Recipient Talk to the Transfer Recipient Before Transferring a Call (Consultative Transfer) Transfer Two Current Calls to Each Other (direct transfer) Without Stay ing On the Line Forwarding All Calls to Another Number Set up call forwarding on your line Cancel call forwarding on your line Verify that call forwarding is enabled on you r line Making Conference Calls Speed Dialing Customizing the Phone Using Call Logs View your call logs Accessing Voice Messages Set up and Personalize Your Voice Message Service Check for New Voice Message Listen to Your Voice Messages or Access the Voice Messages Menu Using a Handset and Speakerphone Park a Call 3