(Optional) Assign IP Information to the Hub
5
The hub is designed to operate with little or no user intervention. In most cases, you can use it with its default settings.
Assign IP information to the FastHub 400M model so that you can use the FastHub 400 series Hub Manager
Contact your system administrator for the hub IP information, and record it here.
Hub IP address:
Subnet mask:
Default gateway:
1From the terminal or PC, enter Y:
Continue with configuration dialog? Y
2Enter the IP address (for example: 10.1.105.20):
Enter IP address: 10.1.105.20
3Enter the subnet mask (IP netmask) (for example: 255.255.255.0):
Enter IP netmask: 255.255.255.0
4Enter the IP address of the default gateway (for example: 10.1.105.254):
Enter IP default gateway: 10.1.105.254
The following information is displayed:
The following configuration command script was created:
ip address 10.1.105.20 255.255.255.0 ip
!
end
5Enter Y:
Use this configuration? Y
The following information is displayed:
Building configuration...
Use the enabled mode ‘configuration’ command to modify this configuration.
Press RETURN to get started.
6Press Return.
7Exit from the terminal session.
You can now display the FastHub 400 series Hub Manager.
