In This Document
How Do I Set Up My High-Speed Internet Access Account?
Connecting the Cable Modem for High-Speed Data Service
Notice à l’attention des installateurs de réseaux câblés
IMPORTANT SAFETY INSTRUCTIONS Notice to Installers
IMPORTANT SAFETY INSTRUCTIONS
Aviso a los instaladores de sistemas CATV
Mitteilung für CATV-Techniker
IMPORTANT SAFETY INSTRUCTIONS
20080814Installer820Intl
Power Source Warning
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Ground the Product
Verify the Power Source from the On/Off Power Light
Protect the Product from Lightning
Eliminate AC Mains Overloads
Check Product Safety
Service Warnings
Protect the Product When Moving It
IMPORTANT SAFETY INSTRUCTIONS
United States FCC Compliance
FCC Compliance
Declaration of Conformity
Canada EMI Regulation
CE Compliance
CE Compliance
EMC EN 55022 and EN EN 61000-3-2 and EN Safety EN
CE Compliance
1999/5/EC 2004/108/EC
Introducing the DPC3010 and EPC3010
Benefits and Features
Home Networking
Performance
Management
Design and Function
Whats in the Carton?
Front Panel Description
Front Panel Description
Back Panel Description
Minimum System Requirements for a PC
What Are the System Requirements for Internet Service?
Minimum System Requirements for Macintosh
System Requirements for an Ethernet Connection
I Do Not Have a High-Speed Internet Access Account
How Do I Set Up My High-Speed Internet Access Account?
I Already Have an Existing High-Speed Internet Access Account
Where Is the Best Location for My Cable Modem?
Before You Begin
How Do I Mount the Cable Modem on the Wall?
Mounting Instructions
Important This graphic is not drawn to scale
Location and Dimensions of the Wall-Mounting Slots
How Do I Mount the Cable Modem on the Wall?
4030802 Rev C
Wall Mounting Instructions
How Do I Connect My Devices to Use the Internet?
Connecting and Installing Internet Devices
To connect devices
Connecting the Cable Modem for High-Speed Data Service
Connecting the Cable Modem for High-Speed Data Service
6 Plug in and power on your PC and other home network devices. The modem LINK LED on the cable modem corresponding to the connected devices should be ON or BLINKING
Installing USB Drivers
Installing USB Driver
Installing USB Drivers
Installing USB Drivers on Windows XP Systems
Q. How Do I Configure TCP/IP Protocol?
Frequently Asked Questions
Configuring TCP/IP on Windows 95, 98, 98SE, or ME Systems
Configuring TCP/IP on Windows XP Systems
Configuring TCP/IP on Windows 2000 Systems
Configuring TCP/IP on Macintosh Systems
Renewing the IP address on Windows 95, 98, 98SE, and ME Systems
Q. How Do I Renew the IP Address on My PC?
Q. After my cable modem is connected, how do I access the Internet?
Q. How do I arrange for installation?
Renewing the IP Address on Windows NT, 2000, or XP Systems
Q. What if I dont subscribe to cable TV?
I dont understand the front panel status indicators
Common Troubleshooting Issues
Q. Can I run more than one device on the modem?
The cable modem does not register an Ethernet connection
Check and Correct
Tips for Improved Performance
Initial Power Up, Calibration, and Registration
Front Panel LED Status Indicator Functions
Front Panel LED Status Indicator Functions
4030802 Rev C
Front Panel LED Status Indicator Functions
Normal Operations
4030802 Rev C
Front Panel LED Status Indicator Functions
Special Conditions
Front Panel LED Status Indicators During Special Conditions
4030802 Rev C
Trademarks
Notices
Disclaimer
Documentation Copyright Notice
If You Have Questions
For Information
For Information
4030802 Rev C
Page
5030 Sugarloaf Parkway, Box
Cisco Systems, Inc
Lawrenceville, GA
April 2012 Printed in USA