In This Document
How Do I Set Up My High-Speed Internet Access Account?
Connecting the Cable Modem for High-Speed Data Service
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS Notice to Installers
Notice à l’attention des installateurs de réseaux câblés
Mitteilung für CATV-Techniker
Aviso a los instaladores de sistemas CATV
IMPORTANT SAFETY INSTRUCTIONS
20080814Installer820Intl
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Power Source Warning
Verify the Power Source from the On/Off Power Light
Ground the Product
Protect the Product from Lightning
Eliminate AC Mains Overloads
Service Warnings
Check Product Safety
Protect the Product When Moving It
IMPORTANT SAFETY INSTRUCTIONS
FCC Compliance
United States FCC Compliance
Declaration of Conformity
Canada EMI Regulation
CE Compliance
CE Compliance
EMC EN 55022 and EN EN 61000-3-2 and EN Safety EN
CE Compliance
1999/5/EC 2004/108/EC
Benefits and Features
Introducing the DPC3010 and EPC3010
Home Networking
Performance
Design and Function
Management
Whats in the Carton?
Front Panel Description
Front Panel Description
Back Panel Description
What Are the System Requirements for Internet Service?
Minimum System Requirements for a PC
Minimum System Requirements for Macintosh
System Requirements for an Ethernet Connection
I Already Have an Existing High-Speed Internet Access Account
How Do I Set Up My High-Speed Internet Access Account?
I Do Not Have a High-Speed Internet Access Account
Where Is the Best Location for My Cable Modem?
Mounting Instructions
How Do I Mount the Cable Modem on the Wall?
Before You Begin
Location and Dimensions of the Wall-Mounting Slots
Important This graphic is not drawn to scale
How Do I Mount the Cable Modem on the Wall?
4030802 Rev C
Wall Mounting Instructions
To connect devices
Connecting and Installing Internet Devices
How Do I Connect My Devices to Use the Internet?
Connecting the Cable Modem for High-Speed Data Service
Connecting the Cable Modem for High-Speed Data Service
6 Plug in and power on your PC and other home network devices. The modem LINK LED on the cable modem corresponding to the connected devices should be ON or BLINKING
Installing USB Drivers
Installing USB Driver
Installing USB Drivers
Installing USB Drivers on Windows XP Systems
Configuring TCP/IP on Windows 95, 98, 98SE, or ME Systems
Frequently Asked Questions
Q. How Do I Configure TCP/IP Protocol?
Configuring TCP/IP on Macintosh Systems
Configuring TCP/IP on Windows 2000 Systems
Configuring TCP/IP on Windows XP Systems
Q. How Do I Renew the IP Address on My PC?
Renewing the IP address on Windows 95, 98, 98SE, and ME Systems
Q. How do I arrange for installation?
Q. After my cable modem is connected, how do I access the Internet?
Renewing the IP Address on Windows NT, 2000, or XP Systems
Q. What if I dont subscribe to cable TV?
Common Troubleshooting Issues
I dont understand the front panel status indicators
Q. Can I run more than one device on the modem?
The cable modem does not register an Ethernet connection
Tips for Improved Performance
Check and Correct
Front Panel LED Status Indicator Functions
Initial Power Up, Calibration, and Registration
Front Panel LED Status Indicator Functions
4030802 Rev C
4030802 Rev C
Normal Operations
Front Panel LED Status Indicator Functions
Special Conditions
Front Panel LED Status Indicator Functions
Front Panel LED Status Indicators During Special Conditions
4030802 Rev C
Notices
Trademarks
Disclaimer
Documentation Copyright Notice
For Information
If You Have Questions
For Information
4030802 Rev C
Page
Cisco Systems, Inc
5030 Sugarloaf Parkway, Box
Lawrenceville, GA
April 2012 Printed in USA