22
Step5 To confirm your selections and to implement them until
you change them or until you restart your DMP,
click Apply.
Step6 To test if your selections are suitable ones for your
DMP display, click Show IP in the DMP Mode area.
Your DMP display should show a Cisco logo and
should show the IP address for your DMP.
Step7 To make your configuration changes permanent, even
after you restart your DMP, do the following:
a. Select Administration > Save Configuration.
b. On the Save Configuration page, click Save.
9 Setting Up Centralized Management
If your DMP will be managed centrally as part of a digital
signage network, you must configure DMPDM and DMM-DSM
to work together.