Chapter 2 Camera Installation
Installing the IP Camera
Step 12 (Optional) If the camera is being install in an area of high humidity, remove the back cover from the camera, place the included silica gel packet in the camera, and then replace the back cover onto the camera.
Figure 2-1 IP Camera Installation Steps
1
23
5
4 | A |
6
8
B 7
What to do next
After you install the IP camera, follow the instructions in Chapter 3, “Performing the Initial Setup of the IP Camera” to access and configure the IP camera.
Cisco Video Surveillance 6400 IP Camera Installation Guide
| ||
|
