Cisco Systems 6500/7600 - page 40

6-40
Cisco 6500/7600 Series Manager User Guide
Chapter6 Logical Objec t Dialog Boxes
C6576M VLAN Dialog Box
Configuration Tab
Figure 6-33 shows the Configuration tab of the C6576M VLAN dialog box.
Figure 6-33 Configuration Tab for the C6576M VLAN Dialog Box
Configuration Area
•MAC Address—MAC address of the VLAN interface.
Note Native IOS a VLAN that is in a suspended state is only partially manageable. The MAC Address
field will display a value of ERROR (or blank) as a result.
•Interface MTU—Layer 2 (link layer) maximum transmission unit on Ethernet VLAN. This
determines the maximum size of Ethernet frames transmitted on the VLAN interface. The value is
read-only on Ethernet and FastEthernet VLANs. The value is read-write on GigabitEthernet
VLANs.
Note IOS 12.1(8a)E5 caveat: Jumbo frame support is incompatible with the IS-IS routing protocol.
Leave the MTU size at the default value on any interface where IS-IS provides routing.
•IP Address—Primary IP address of interface. Value is nil on a layer-2 interface.
•Netmask—Subnet mask for the primary IP address.
•Clear IP Address ——After receiving confirmation, will unset the IP address for this interface.