6-76
Cisco 6500/7600 Series Manager User Guide
Chapter6 Logical Objec t Dialog Boxes
C6576M BGP Dialog Box
–
GE-WAN <slot>/<port>
–
POS <slot>/<port>
–
ATM <slot>/<subslot>/<port>
–
Port-channel <n> (Native IOS only)
–
VLAN <n>
•Protocol—Identifies the routing protocol source of network routes.
•Source ID—Identifies the routing process from which routes are being distributed. This field may
have the following values:
–
IS-IS—This is either an implicit null tag or the tag of a named IS-IS routing process.
–
BGP—This is a 16-bit autonomous system ID in the range of 1 to 65535.
–
EIGRP—This is a 16-bit autonomous system ID in the range of 1 to 65535.
–
OSPF—This is a 16-bit OSPF process ID in the range of 1 to 65535.
Edit Distribution Table AreaThis area allows changes to be made to the Distribution Table attributes described in the “Distribution
List Table Area” section on page6-75:
•ACL ID—Unique identifer of an ACL for filtering routing updates sent/received by a routing
process.
•Direction—Indicates whether the filter will be applied against routing updates received by the
routing process or advertised by the routing process.
•Interface—Identifies a particular interface that the filter is applied to.
•Protocol—Identifies a protocol source of network routes.
•Source ID—Identifies a specific routing process instance that redistributed routes are derived from.
•Add button—Specifies a filter for suppressing or allowing distribution of network routes through
BGP.
•Delete button—Removes a filter for suppressing or allowing distribution of network routes through
BGP.