6-80
Cisco 6500/7600 Series Manager User Guide
Chapter6 Logical Objec t Dialog Boxes
C6576M OSPF Dialog Box
Status Field
The Status display-only field located at the bottom of the window indicates the current state of the object.
This field has the following values:
•decommissioned—CEMF is not actively monitoring the object attributes.
•normal—Presence polling of the object.
•normallostcomms—CEMF has lost communication with the device from the normal state.
Area TabFigure 6-64 shows the Area tab of the C6576M OSPF dialog box.
Figure 6-64 Area Tab of the C6576M OSPF Dialog Box
Area Configuration Area
This describes OSPF NSSA and stub area configurations. The information for a particular area can be
displayed by selecting the desired area from the Areas list. When you select an area, the following
information is provided:
•Area ID—Identifies a stub or NSSA area adjacent to the router. The identifier can be specified as
either a decimal value or as an IP address.
•Area Type—Type of area. The type has the following values:
–
default—Not a stub or NSSA area.
–
stub—Information on external routes are not sent to stub areas.