1-53
Cisco 7200 VXR Installation and Configuration Guide
OL-5013-08
Chapter1 Cisco 7200 VXR Product Overview Field-Replaceable Units
SeeTable 1-31,Table 1-32, and Table 1-33 for the factory-installed Flash memory card options and their
productnumbers, the Flash Disk memory options and their product numbers, and the CompactFlash Disk
memory options and their product numbers.
Configurations for flash memory cards, flash disks and CompactFlash Disks are in this section.
Rack-Mount and Cable-Management Kit
The rack-mount and cable-management kit for the Cisco 7200 VXR routers consists of rack-mount and
cable-management brackets that are designed for mounting your router in 19-inch, four-postor two-post
equipment racks and for relieving strain on port adapter interface cables that are installed on port
adapters in the router. The kit is shipped with each Cisco 7200 VXR router and is also available as a
single FRU.
For detailed instructions about how to install the rack-mount and cable-management brackets on your
Cisco 7200 VXR router, see Chapter 3, “Installing a Cisco 7200 VXR Router,” the“Rack-Mounting a
Cisco 7200 VXR Router” section on page 3-2 and the “General Tabletop or Workbench Installation”
section on page 3-14.
Table1-31 Flash Memory Card Options
Memory Size Product Number1
1. These products are also available as Flash memory card upgrades. To order an upgrade, add an equal sign (=) after the
product number, for example, MEM-I/O-FLC16M=.
16 MB MEM-I/O-FLC16M=
20 MB MEM-I/O-FLC20M=
Table1-32 Flash Disk Options
Memory Size Product Number1
1. These products are also available as Flash Disk upgrades. To order an upgrade, add an equal sign (=) after the product
number, for example, MEM-I/O-FLD128M=.
64 MB MEM-I/O-FLD64M=
128 MB MEM-I/O-FLD128M=
Table1-33 CompactFlash Disk Options
Memory Size Product Number
64 MB MEM-COMP-FLD64M=
128 MB MEM-COMP-FLD128M=
256 MB MEM-NPE-G2-FLD256=