Install Field Replaceable Units (FRUs)

Remove the Power Supply

On/off switch

AC receptacle

Cable retention clip

DC OK LED

H1998

26

Note The following procedure assumes you have already removed the chassis cover panel, the fan tray, the power harness cover, and the power harness. If you have not, refer to the appropriate sections in the Cisco 7500 Series Installation and Configuration Guide for instructions.

Note AC-input power supply is shown above. Step 1 Turn off the system power switch.

Warning Before working on the chassis or near power supplies, disconnect the power cable on AC units or disconnect the power at the circuit breaker on DC units.

Step 2 Disconnect the power cable from the power supply.

For the AC-input power supply: Move the cable retention clip away from the power cable and disconnect the power cable from the AC receptacle.

For the DC-input power supply: Use a wire cutter to cut the nylon cable tie that provides strain relief for the DC power cable. (You must replace this nylon cable

tie with a new one after the new power supply is installed.) Remove the DC-input cable from the terminal block.

Step 3 Attach an ESD-preventive strap between you and any unpainted chassis surface.

Step 4 Disconnect the power harness plug from the backplane receptacle by pulling the polarized plug out of the receptacle; do not pull on the wires.

Step 5 Use a Number 2 Phillips screwdriver to remove the two M4 x 10-mm Phillips panhead screws that secure the power supply ears (one on each side of the power supply) to the chassis frame.

Step 6 Using both hands, grasp both of the power supply handles and pull the power supply about halfway out of the bay. Then grasp the sides of the power supply and pull it out of the chassis.

Page 28
Image 28
Cisco Systems 7505 quick start Remove the Power Supply

7505 specifications

The Cisco Systems 7505 is a robust and versatile router that has been a key player in the networking landscape since its introduction in the 1990s. Known for its reliability and performance, the 7505 is well-suited for enterprise environments that demand high-capacity networking solutions.

One of the main features of the Cisco 7505 is its modular architecture. This allows for significant flexibility in configuration, enabling organizations to tailor the device to their specific requirements. The modular design supports various interface cards, allowing users to customize their connectivity based on the types of networks they operate within. This adaptability makes it an ideal choice for businesses that are looking to scale their network infrastructure as needs evolve.

The Cisco 7505 supports a variety of protocols, including IP, IPX, AppleTalk, and more. This multi-protocol support ensures that organizations can integrate the router into diverse environments, facilitating seamless communication across different systems. The device is also equipped with advanced routing features such as policy-based routing, which allows for improved traffic management and prioritization based on business requirements.

Another essential characteristic of the Cisco 7505 is its performance capabilities. The router is designed to handle high volumes of traffic, making it suitable for both enterprise-level and service provider networks. With support for multiple interfaces and the ability to handle both WAN and LAN traffic, the 7505 can serve as a central hub in complex networking setups.

In terms of security, the Cisco 7505 offers several built-in features to safeguard network integrity. It supports access control lists (ACLs), virtual private networking (VPN), and encryption technologies, providing organizations with tools to protect sensitive data as it traverses the network.

The Cisco 7505 also emphasizes ease of management with its user-friendly Command Line Interface (CLI) and integration with Cisco’s network management tools. This simplifies monitoring, troubleshooting, and configuration processes, allowing network administrators to maintain optimal performance with minimal downtime.

In summary, the Cisco Systems 7505 is a formidable router that combines modularity, multi-protocol support, performance, security, and ease of management. Its features make it an excellent choice for organizations seeking a reliable and versatile networking solution to meet their evolving demands.