Start and Configure the System

Perform a Basic Configuration Using Setup

Note The router’s serial (WAN) cable should not be connected to the CSU/DSU unless you are planning to use AutoInstall. If you are using the console Y-cable that shipped with your router, use either of the two DB-25 male plug ends of the Y-cable.

Step 1 Select the protocols supported on your interfaces. For Internet Protocol (IP)-only installations, accept the default values. A typical minimal configuration using IP, IPX, and AppleTalk follows:

Configuring global parameters:

Enter host name [Router]: Router

Step 2 Enter the enable secret password and the enable password when the following is displayed:

The enable secret is a one-way cryptographic secret used

instead of the enable password when it exists.

Enter enable secret: barney

The enable password is used when there is no enable secret

and when using older software and some boot images.

Enter enable password: betty

Step 3 Enter yes or no to accept or refuse SNMP

management:

Configure SNMP Network Management? [yes]: yes Community string [public]:

Step 4 Enter no to refuse to enable CLNS:

Step 5 Enter yes to enable routing on AppleTalk

and IPX:

Configure AppleTalk? [no]: yes

Multizone networks? [no]: yes

Configure IPX? [no]: yes

Step 6 Enter no to refuse to enable Vines, XNS, DECnet, or bridging:

Configure Vines? [no]: no

Configure XNS? [no]: no

Configure DECnet? [no]: no

Configure bridging? [no]: no

Step 7 Enter yes or press Return to configure IP, and then select an interior routing protocol for IP, if you are using IP routing:

Configure IP? [yes]: yes

Configure IGRP routing? [yes]: yes

Your IGRP autonomous system number [1]: 15

Step 8 At the # prompt, enter the copy

running-config startup-config command

to save the configuration to NVRAM as

follows:

Hostname# copy running-config startup-config

Note Consult your network administrator to

obtain network addresses and subnet mask

information.

11

Configure CLNS? [no]: no

Page 13
Image 13
Cisco Systems 7505 quick start Perform a Basic Configuration Using Setup

7505 specifications

The Cisco Systems 7505 is a robust and versatile router that has been a key player in the networking landscape since its introduction in the 1990s. Known for its reliability and performance, the 7505 is well-suited for enterprise environments that demand high-capacity networking solutions.

One of the main features of the Cisco 7505 is its modular architecture. This allows for significant flexibility in configuration, enabling organizations to tailor the device to their specific requirements. The modular design supports various interface cards, allowing users to customize their connectivity based on the types of networks they operate within. This adaptability makes it an ideal choice for businesses that are looking to scale their network infrastructure as needs evolve.

The Cisco 7505 supports a variety of protocols, including IP, IPX, AppleTalk, and more. This multi-protocol support ensures that organizations can integrate the router into diverse environments, facilitating seamless communication across different systems. The device is also equipped with advanced routing features such as policy-based routing, which allows for improved traffic management and prioritization based on business requirements.

Another essential characteristic of the Cisco 7505 is its performance capabilities. The router is designed to handle high volumes of traffic, making it suitable for both enterprise-level and service provider networks. With support for multiple interfaces and the ability to handle both WAN and LAN traffic, the 7505 can serve as a central hub in complex networking setups.

In terms of security, the Cisco 7505 offers several built-in features to safeguard network integrity. It supports access control lists (ACLs), virtual private networking (VPN), and encryption technologies, providing organizations with tools to protect sensitive data as it traverses the network.

The Cisco 7505 also emphasizes ease of management with its user-friendly Command Line Interface (CLI) and integration with Cisco’s network management tools. This simplifies monitoring, troubleshooting, and configuration processes, allowing network administrators to maintain optimal performance with minimal downtime.

In summary, the Cisco Systems 7505 is a formidable router that combines modularity, multi-protocol support, performance, security, and ease of management. Its features make it an excellent choice for organizations seeking a reliable and versatile networking solution to meet their evolving demands.