Setting the Speaker level
3
* Bass Peak Setup *
Bass Peak Level
Limiter = Yes
Peak Level =+18dB
Starting
The Test Tone
4
* Bass Peak Setup *
1.Turn Volume Up.
2.When Sound Distorts.
3.Press ENTER.
Level 
-31dB
•Using the
1.Press the OSD MENU button.
2.Select “Speaker Setup” and then press the right edge of the ENTER/Cursor button.
3.Select “Bass Peak Setup” and then press the right edge of the ENTER/Cursor button.
The “Bass Peak Setup” screen appears.
Bass Peak Level Limiter :
Enables (Yes) / Disables (No) the bass peak limiter.
The Peak Level indicates the bass peak level when the limiter is set to Yes.
4.Select “Starting The Test Tone” and then press the right edge of the ENTER/Cursor button.
This generates a test signal and automatically sets the unit's MASTER VOLUME control knob to
You can now press the right and left edges of the ENTER/Cur- sor button to adjust the peak level in units of 1 dB.
5.Press the ENTER/Cursor button just before the sound is dis- torted.
The bass peak level is stored and the Speaker Setup screen is displayed again.
Playing a digital source (Digital Input Setup)
2
DIGITAL/ |
|
|
|
|
|
|
ANALOG |
| SPEAKERS |
|
| STEREO |
|
| A |
| PCM DIGITAL | DIRECT |
| |
|
|
|
|
|
|
|
3
PRESET/MODE ADJ
PUSH TO ENTER
PRESET/MODE ADJ
PUSH TO ENTER
Digital input setup
Each of the DVD, CD, VIDEO
DVD: OPT2
VIDEO1: COAX1
VIDEO2: – – – –
VIDEO3: COAX2
TAPE: – – – –
CD: OPT1
Assume that you have connected a DVD player to the COAXIAL 1 connector.
1.Press the DVD input selector button.
2.Press the DIGITAL/ANALOG button until "Digital In- put?" appears.
3.Press the SMART SCAN CONTROLLER. The digital input setup mode has been set.
By rotating the SMART SCAN CONTROLLER, select the digi- tal audio input connector “COAX 1,” from among “OPT 1,” “OPT 2,” “ COAX 1,” “COAX 2” and “– – –
4.Press the SMART SCAN CONTROLLER. This completes the digital input setup.
To select an input source using the
23
