Selecting an input source
2. SP A | |
1 | SLEEP |
2 | MODE AUDIO |
4. VOLUME Δ/∇ | |
1. INPUT SELECTOR
3 DIMMER
1This button allows you to set the sleep timer.
(See page 31.)
2Press this button to set the mode in which you can operate the
3Use this button to change the brightness of the display (normal or dim).
4You can connect stereo headphones to the PHONES jack using a standard stereo plug.
(When you connect headphones, the unit will enter STEREO mode automatically and no sound will be heard from the speakers.)
If no sound is heard from the speakers, check the following items:
•When you have selected DVD, CD, VIDEO 1- 3, or TAPE, check the “digital input setup” is correct. (See page 23.)
•Make sure that the input signal format setting is correct. (See page 28,29.)
•The Muting function may be activated. Cancel the Muting func- tion. (See “Muting the sound” on page 31.)
•Make sure that SPEAKERS A is selected. (See “Selecting the speaker system” on page 30.)
3
** Input Selector **
Input | = DVD |
|
|
| OPTICAL 1 |
| |
Digital Input | Setup | ||
Video Assign Setup | |||
IntelliVolume | Setup | ||
Listening Dolby | |||
| Mode= Pro Logic | ||
| THX | Cinema | |
Warning:
•Do not play
•Selecting an input source using the
Instead of using the input selector buttons, you can use
1.Press the OSD MENU button.
2.Select “Input Selector” and then press the right edge of the ENTER/Cursor button.
3.Press the upper or lower edge of the ENTER/Cursor button to select “Input” and then press the right or left edge of the button to select an input source.
•When you select DVD, CD, VIDEO 1- 3, or TAPE, set the digital input parameters on the Digital Input Setup screen. (See page 29.)
•When you have selected TUNER, the currently selected pre- set number is displayed on the next line.
•See page 33 for information on MULTICH INPUT.
4.Press the center of the ENTER/Cursor button, or press the EXIT button, to exit the setup mode.
27
