Setting the speaker configuration

Setting the speaker configuration

3

** Speaker Setup **

Config Setup

Distance Setup

Level Setup

Bass Peak Setup

4

* Config Setup *

All Channel For

THX Speakers =No

5

* Config Setup *

Subwoofer =Yes

Front =Small

Center =Small

Surround =Small

Using the on-screen display

1.Press the OSD MENU button.

2.Select “Speaker Setup” and then press the right edge of the ENTER/Cursor button.

3.Select “Config Setup” and then press the right edge of the ENTER/Cursor button.

4.For the DTR-6, go to the next step.

For the DTR-7, the display shows “All Channel For THX Speakers.”

Select “Yes” and then press the center of the ENTER/Cursor button. This sets all the connected speakers to THX speakers.(The following steps are unnecessary.)

Select “No” and then press the center of the ENTER/Cursor but- ton to go to the next step.

5.Press the upper or lower edge of the ENTER/Cursor button to set each item and then press the right or left edge of the button to set a parameter

Subwoofer: Set whether or not a subwoofer is connected.

Yes:

A subwoofer is connected.

No:

A subwoofer is NOT connected.

Front : Select the size of your front speakers.

Large: Large front speakers are used.

Small: Small front speakers are used.

Center : Select the size of your center speaker.

Large: A large center speaker is used.

Small: A small center speaker is used.

None: A center speaker is NOT used.

Surround : Select the size of your surround speakers. Large: Large surround speakers are used.

Small: Small surround speakers are used.

None: Surround speakers are NOT used.

6.Press the center of the ENTER/Cursor button, or press the EXIT button, to exit the setup mode.

19

Page 19
Image 19
Integra DTR-7 instruction manual Setting the speaker configuration, Using the on-screendisplay