Setting the speaker distance

Setting the speaker distance

1

SP/SYS

SETUP

PRESET/MODE ADJ

PUSH TO ENTER

SPEAKERS

A

(Loudspeaker Position Time Synchronization*) TUNED Manual background

AUTO

Setting the distance from each speaker to the listening position

(Loudspeaker Position Time Synchronization*)

Select a value that is closest to the actual distance between each speaker and the listening position.

Using the SMART SCAN CONTROLLER, you can easily set the speaker configuration. Turn it to select the setting and press it to go to the next item.

For each speaker, you can set a distance of 0.3 meter to 9.0 meters (or 1 foot to 30 feet) in increments of 30 cm (1 foot).

1. Press the SP/SYS SETUP button repeatedly until “Distance

Setup ?” appears.

Press the SMART SCAN CONTROLLER.

2 ~ 7

PRESET/MODE ADJ

SPEAKERS

 

 

TUNED

 

 

 

 

 

A

 

 

PCM DIGITAL

FM STEREO AUTO

ft

PUSH TO ENTER

PRESET/MODE ADJ

PUSH TO ENTER

8

PRESET/MODE ADJ

PUSH TO ENTER

2.

“Left=” appears. Set the distance from the left front speaker.

 

Press the SMART SCAN CONTROLLER.

3.

“Center=” appears. Set the distance from the center speaker.

 

Press the SMART SCAN CONTROLLER.

4.

“Right=” appears. Set the distance from the Right front speaker.

 

Press the SMART SCAN CONTROLLER.

5.

“R-Sur=” appears. Set the distance from the Right surround

 

speaker.

 

Press the SMART SCAN CONTROLLER.

6.

“L-Sur=” appears Set the distance from the left surround

 

speaker.

 

Press the SMART SCAN CONTROLLER.

7.

“SW=” appears. Set the distance from the subwoofer.

8.

Press the SMART SCAN CONTROLLER.

 

The speaker distance setup has been completed.

*

Loudspeaker Position Time Synchronization is a registered trademark of

 

Lucasfilm LTD.

* Distance Setup *

Left =3.6m/12ft Manual background Center =3.6m/12ft Manual backgroundManual background Right =3.6m/12ft Manual backgroundManual background (R-Sur =2.1m/ 7ft) Manual background

Using the on-screen display

1.Press the OSD MENU button.

2.Select “Speaker Setup” and then press the right edge of the ENTER/Cursor button.

3.Select “Distance Setup” and then press the right edge of the ENTER/Cursor button.

You can now set the distance from each speaker.

(When the cursor is on “Right,” you can press the lower edge of the ENTER/Cursor button to display additional items.)

Select a value that is closest to the actual distance. For each speaker, you can set a distance of 0.3 meter to 9.0 meters (or 1 foot to 30 feet) in increments of 30 cm (1 foot).

Left: Left front speaker

Center: Center speaker

Right: Right front speaker

R-Sur:Right surround speaker

L-Sur:Left surround speaker

Subwoofer: Subwoofer

4.Press the center of the ENTER/Cursor button, or press the EXIT button, to exit the setup mode.

20

Page 20
Image 20
Integra DTR-7 Setting the speaker distance, Loudspeaker Position Time Synchronization, Using the on-screendisplay