Chapter42 Cisco IP Phone Services Configuration
Updating a CiscoIP Phone Service Parameter
42-10
CiscoCallManager Administration Guide
OL-6503-01
Updating a Cisco IP Phone Service ParameterPerform the following steps to update a service parameter for a specific
Cisco IP Phone Service.
Note If you remove a Cisco IP Phone Service parameter or change the parameter name
of a phone service for a phone service to which users are subscribed, be sure to
click Update Subscriptions to update all currently subscribed users with the
changes. If you do not do so, users must resubscribe to the service to rebuild the
URL correctly.
Procedure
Step1 Find the Cisco IP Phone service by using the procedure in the “Finding a
Cisco IP Phone Service” section on page42-2.
Step2 From the Cisco IP Phone Services list, choose the phone service that you want to
update.
The Cisco IP Phone Services Configuration window displays.
Step3 In the Parameters list box, choose the name of the parameter that you want to
update.
Step4 Click Edit.
Step5 Update the appropriate settings as described in Table 4 2-2.
Step6 To apply the changes, click Update, or to apply the changes and close the dialog,
click Update and Close.
Step7 To apply the changes, update the Cisco IP Phone Services Configuration window:
•If the service was modified after subscriptions existed, click Update
Subscriptions to rebuild all user subscriptions. You must update
subscriptions if you changed the service URL, removed a phone service
parameter, or changed the name for a phone service parameter.
•If the service is new and you do not need to rebuild user subscriptions, click
Update.