Cisco Systems 7905 manual Adding a Cisco IP Phone Service to a Phone Button, 42-13

Chapter 42 Cisco IP Phone Services Configuration

Adding a Cisco IP Phone Service to a Phone Button

Table 42-2 Cisco IP Phone Service Parameter Settings (continued)

Field	Description
Parameter	Enter a description of the parameter. The user can access
Description	the text that is entered here while the user is subscribing
	to the service. The parameter description should provide
	information or examples to help users input the correct
	value for the parameter.
Parameter is	If the user must enter data for this parameter before the
Required	subscription can be saved, check the Parameter is
	Required check box.
Parameter is a	You can mask entries in the Cisco IP Phone User Options
Password (mask	application, so asterisks display rather than the actual
contents)	user entry. You may want to do this for parameters such
	as passwords that you do not want others to be able to
	view. To mask a parameter entry, check the Parameter is
	a Password (mask contents) check box in the Configure
	Cisco IP Phone Service Parameter window in
	Cisco CallManager Administration.

Adding a Cisco IP Phone Service to a Phone Button

In addition to adding a Cisco IP Phone Service, so it is available to users on their phones, you can assign the service to a phone button that is configured as a service URL. This gives the user one-button access to the service without using the services button on the IP phone.

Perform the following steps to add a service to a service URL button:

1.Add the service to Cisco CallManager (see Adding a Cisco IP Phone Service, page 42-4)

2.Customize a phone button template by configuring a Service URL button (see Adding Phone Button Templates, page 59-4)

3.Add the customized phone button template to the phone (see Adding a Phone, page 57-5)

4.Subscribe the service to the phone (see Configuring Cisco IP Phone Services, page 57-36)

	Cisco CallManager Administration Guide
OL-6503-01		42-13