
GF14 and GF40 SERIES GAS FRYERS
CHAPTER 1: GENERAL INFORMATION
1.1Parts Ordering and Service Information
In order to assist you as quickly as possible, the Frymaster Factory Authorized Service Center (FASC) or Service Department representative requires certain information about your equipment. Most of this information is printed on a data plate affixed to the inside of the fryer door. A typical data plate is illustrated below.
GF14SD | 0201FM0208 | AF | NAT |
1050 | 4.00 | 10000 |
|
1.65 | 000 |
| .00 |
Parts orders must be placed directly with your local FASC or distributor. Included with fryers when shipped from the factory is a list of Frymaster FASCs. If you do not have access to this list, contact the Frymaster Technical Service Department at
When ordering parts, the following information is required:
Model Number:
Serial Number:
Type of Gas:
Item Part Number:
Quantity Needed:
Service information may be obtained by contacting your local FASC. Information may also be obtained by calling the Frymaster Technical Service Department at
When requesting service, please have the following information ready:
Model Number:
Serial Number:
Type of Gas:
In addition to the model number, serial number, and type of gas, please be prepared to describe the nature of the problem and have ready any other information that you think may be helpful in solving your problem.