Cisco Systems 800 Series quick start Overview, Parts List, Verify the PC Setup

Complete the information below, and keep it for reference.

Company product purchased from

Company telephone number

Product model number

Product serial number

Maintenance contract number

2Overview

This document describes the basic process of cabling and configuring the Internet access device, the Cisco 800 series router. For advanced cabling information, refer to the Cisco 800 Series Router Hardware Installation Guide. For advanced configuration information, refer to the Cisco 800 Series Router Software Configuration Guide. These documents are available on Cisco.com.

3Parts List

The shipment of your Cisco 800 series router includes the following items:

•One Cisco 800 series router

•One yellow Ethernet cable

•One orange ISDN S/T cable (Cisco 801 and Cisco 803 only)

•One red ISDN U cable (Cisco 802 and Cisco 804 only)

•One RJ-45-to-RJ-11 adapter cable (for use with the red ISDN U cable)

•One blue console cable

•One DB-9-to-RJ-45 adapter (for use with the blue console cable)

•One DB-25-to-RJ-45 adapter (for use with the blue console cable)

•One black power supply

•One black power supply cord

•Product Documentation

4Verify the PC Setup

Before you begin, verify that each computer that will be connected to the router has a network interface card (NIC) installed and that Transmission Control Protocol/Internet Protocol (TCP/IP) has been loaded and configured. For more information on how to configure TCP/IP, refer to the PC Configuration Instructions to Establish Cisco Router-to-PC Communications, which is available on Cisco.com.

3