Cisco Systems 8xDMT manual Prerequisites, Configuration Tasks, Command Purpose

Octal-Port DMT ATU-C Line Card

Prerequisites

Prerequisites

To use the 8xDMT feature, you must have one of the following DSLAMs with the 8xDMT line card, and IOS 12.1(6) or above installed:

•Cisco 6015

•Cisco 6160

•Cisco 6260

Configuration Tasks

See the following sections for configuration tasks for the 8xDMT feature. Each task in the list indicates if the task is optional or required.

•Preprovisioning the 8xDMT Line Card, page 6 (optional)

•Creating and Associating a DSL Profile with Each Port, page 7 (required)

•Modifying the DSL Profile, page 7 (optional)

Preprovisioning the 8xDMT Line Card

Starting at the global configuration prompt, use the following commands to preprovision a slot for use with the 8xDMT line card:

	Command	Purpose
Step 1
	DSLAM(config)# slot 1 ATUC-1-DMT8	This command associates the 8xDMT line card with
		the specified slot.
Step 2
	DSLAM(config)# dsl-profile 8xDMT	Creates and names the DSL profile, 8xDMT in
		this example.
Step 3
	DSLAM(config-dsl-prof)# exit	Return to the global configuration prompt.
Step 4
	DSLAM(config)# interface atm1/1	Enter interface configuration mode on the port
		where you will associate the 8xDMT DSL profile.
		Repeat this process on each port that you wish to
		associate with a DSL profile.
Step 5
	DSLAM(config-if)# dsl profile 8xDMT	Associates the DSL profile named 8xDMT with
		atm interface 1/1.
Step 6
	DSLAM(config-if)# exit	Return to the global configuration prompt.

Tips After you have completed these steps, insert the 8xDMT line card to activate the card with your preprovisioned configuration.

Verifying the Preprovisioned Slot

Use the show running-configurationcommand to verify that you preprovisioned the slot correctly.

Cisco IOS Release 12.1(6)DA

6