Cisco Systems manual Supported Platforms, DSLAMs, Number of Available 8xDMT Chassis Slots

Octal-Port DMT ATU-C Line Card

Supported Platforms

Supported Platforms

DSLAMs

This feature supports the 8xDMT line card on the Cisco 6015, Cisco 6160, and Cisco 6260 platforms with NI-2. Table 1details the total available ADSL modem connections for each chassis.

Table 1	Number of Available Modem Connections for Each Chassis
		Number of Available 8xDMT
Chassis		Slots	Total ADSL Modem Connections
Cisco 6015		6	48
Cisco 6160		32	256
Cisco 6260		30	240

The 8xDMT is designed for use with the Cisco 6015, Cisco 6160, or Cisco 6260 chassis in one of the following configurations:

•Cisco 6015, Cisco 6160, or Cisco 6260 with a POTS splitter chassis—Provisions one modem directly and is physically connected to one specific subscriber line through the POTS splitter chassis.

•Cisco 6015, Cisco 6160, or Cisco 6260 without a POTS splitter chassis—Provisions one modem directly and is physically connected to one specific subscriber line through the main distribution frame (MDF) connections.

CPE

•Cisco 677

•Cisco 678

•Cisco Soho 77

•Cisco 827

•Cisco IAD 2423

•Cisco 1700, Cisco 2600, and Cisco 3600 series with ADSL WIC

•Alcatel Speed Touch Home

•Alcatel Speed Touch Pro

•Efficient Networks 5260 and 5262

•Westell modems based on Alcatel Microelectronics firmware version 1.4.1

•CPE using ADI chipsets with firmware versions 0X3019BE70 (Version 3.0),

0X2219BE04 (Version 2.2), or 0X2019BE2D (Version 2.0) should operate similar to the Cisco 677

Note A correct firmware version does not guarantee interoperation with third-party CPE. Some hardware variations can affect performance and error rates. Test the interoperation of CPE with the 8xDMT in the targeted deployment model before provisioning service.

Cisco IOS Release 12.1(6)DA

4