Access Point Physical Hardware and Mounting Options
If the AP will be mounted directly to a ceiling on the gridwork, then AIR-AP-BRACKET-1 mounts flush and has the lowest profile. However, if the AP will be mounted to an electrical box or other wiring fixture, or inside a NEMA enclosure or perhaps wall mounted, then AIR-AP-BRACKET-2 is a better choice. The extra space in the bracket allows for wiring, and the extra holes line up with many popular electrical boxes. When mounting the bracket to the ceiling gridwork, some ceiling tiles are recessed. For this reason, two different styles of ceiling clips, recessed and flush rails, are available (Figure 15).
Figure 15 Recessed and Flushed Ceiling Grid Clips
Note Different clips are available for attaching to ceiling grid work
Channel Rail Adapters - Cisco Part Number AIR-CHNL-ADAPTER
When mounting APs to ceiling channel rails such as the ones shown in Figure 16, an optional channel adapter is used: AIR-CHNL-ADAPTER. It comes in a two-pack and attaches to the ceiling grid clip above. Refer to Figure 17 and Figure 18.
Figure 16 Example of Channel Rails
Cisco Aironet Series 1600/2600/3600 Access Point Deployment Guide, Release 7.5
14