Cisco Systems ASR1000 Cisco ASR 1000 Series SPA Interface Processor

2-10

Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide

OL-13208-01

Chapter 2 Cisco ASR 1000 Series Routers Components

Cisco ASR 1000 Series SPA Interface Processor

Figure 2-4 shows the Cisco ASR 1000 Series Embedded Services Processor (ESP10) LEDS on the front

panel.

Figure 2-4 Cisco ASR1000-ESP10 Faceplate LEDs

Table 2-5 lists the Cisco ASR1000-ESP5 or ASR1000-ESP10 LEDs and behaviors.

Cisco ASR 1000 Series SPA Interface Processor

This section describes the SPA interface processor for the Cisco ASR 1006 Router, Cisco ASR 1004

Router and the Cisco ASR 1002 Router.

The Cisco ASR 1000 Series SPA Interface Processor for the Cisco ASR 1006 and Cisco ASR 1004

routers:

•Is a carrier card that inserts into a router slot like a line card.

1Power LED 3Status LED

2Active LED 4Standby LED

280080

Table 2-5 Cisco ASR1000-ESP5 or ESP-10 Processor LEDs for the Cisco ASR 1002 Router

LED Label LED Color In the Power Up State -Behavior Description

1PWR Power Solid green All power supplies are within operational limits.

Off Off, the router is in standby mode.

3STAT STATUS Green Code has successfully downloaded and is

operational.

Yellow BOOT ROM has successfully loaded.

Red Not booted.

2ACTV Active Green The embedded services processor is green when

active.

4STBY Standby None Will always be off.