Samsung Cable Connection Installation of SPD-1000, Wall Mount STB-280PW, Wall MountSTB-230PW

Installation

Cable Connection

Installation of SPD-1000

1.First, connect one end of the BNC video cable connector to the Video Output Terminal.

2.Next, connect the other end of the connector to the Video Input Terminal of the monitor.

Monitor

In Terminal

Monitor

DATA BOX

Video Out Terminal

•Precautions for Installation

-Check that the installation location can safely bear four times the weight of the camera and its installation fittings.

-When fixing the ceiling installation bracket, use the supplied installation template and fixing screws.

-Take care not to drop the product during installation. Do not allow anyone to stand below the installation area.

• Optional Products for Installation

3. Connect the Controller Connection Terminal

of SPD-1000 and the external

Controller.

Controller

Controller Connection Terminal

1) Wall Mount (STB-280PW)

This housing is used to install the camera on an indoor wall or ceiling using an external conduit.

2) Wall Mount(STB-230PW)

4.Then, connect the Power Adapter Cable. Use a driver (-) to screw one part of the Power Adapter consisting of two lines to the Power Input Terminal of

the camera holder.

5. Connect the Power
Adapter’s plug to the Power	Power Adapter
Outlet.

This housing is used to install the camera on an indoor wall.

3) Dome Housing (STH-1000PI)

This housing is used to install the camera in a location that is dusty, or a place where extra protection for the camera is required.

4) Outdoor Housing (STH-1000PO)

This housing is used to install the camera at outdoor area

24 25