Functional Description
Language : The OSD can be displayed either in English (default setting) , Chinese, French, German, Italy and Spanish
Main Menu | OSD Setting |
| |
Camera Setting | Camera ID | ON | |
Sequence Setting | Camera Name |
| |
P/T Setting | Preset Number | ON | |
OSD Setting | Preset Name |
| |
Sequence Status | OFF | ||
Alarm Setting | |||
Area Name | OFF | ||
Initialize | |||
PTZ Position | ON | ||
Status | |||
Language | English | ||
|
5) Alarm Setting
Output Clear : If you want to cancel the operating Alarm outputs at once, select the corresponding menu to cancel the operating Alarm.
Main Menu | Alarm Setting |
|
Camera Setting | Output Clear |
|
Sequence Setting | Input 1 | OFF |
P/T Setting | Input 2 | OFF |
OSD Setting | Output | OFF |
Alarm Setting | Enable | OFF |
Initialize | MD Dwell Time | ON 30 SEC |
Status |
|
|
Input 1, 
Input 2 : Alarm Input Mode/Priority/Method is set up.
Alarm Setting |
| Alarm Setting | |
Output Clear |
| Output Clear | |
Input 1 | OFF | Input 1 | NO L PRESET 031 |
Input 2 | OFF | Input 2 | NC H PRESET 031 |
Output | OFF | Output | ON *1*2 MD 03SEC |
Enable | OFF | Enable | ON |
MD Dwell Time | ON 30 SEC | MD Dwell Time ON 30 SEC | |
NC/NO/OFF : NC/NO/OFF can be selected depending on the alarm sensor.
L/H (Priority) : Priority for the 2 alarm inputs is set up. Response comes first from the alarm input of higher priority.
Preset/Swing/Group/Tour/Trace/A.PAN :
Whether to enable the operation of Preset/Swing/Group/Tour/Trace/A.PAN by alarm input can be set up. When the alarm is input, it stays in the Preset/Swing/ Group/ Tour/Trace/A.PAN position.
Output : One of the 2 Alarm Outs and MD(Motion Detection) corresponds to each Alarm input.
Alarm Setting |
| Alarm Setting | |
Output Clear |
| Output Clear | |
Input 1 | OFF | Input 1 | NO L PRESET 031 |
Input 2 | OFF | Input 2 | NC L PRESET 031 |
Output | OFF | Output | ON *1*2 MD 03SEC |
Enable | OFF | Enable | ON |
MD Dwell Time | ON 30 SEC | MD Dwell Time ON 30 SEC | |
For the 2 Alarm Outputs, On/Off and the operation time can be set up in the units of second/minute/hour.
Enable : It can be determined whether to enable the alarm setting.
Alarm Setting |
| Alarm Setting | |
Output Clear |
| Output Clear | |
Input 1 | OFF | Input 1 | NO L PRESET 031 |
Input 2 | OFF | Input 2 | NC L PRESET 031 |
Output | OFF | Output | ON *1*2 MD 03SEC |
Enable | OFF | Enable | ON |
MD Dwell Time | ON 30 SEC | MD Dwell Time ON 30 SEC | |
ON/OFF : Alarm is enabled in ON mode.
54 | 55 |
