Installation
Installing the SPD-1000 on a Ceiling
1.Prepare the accessories in the camera box (power adapter, installation template, BNC auxiliary cable, 1
power adapter(DC 12V, Peak 4A) | installation template | BNC auxiliary cable | 1 |
screw |
3.Align the arrow on the ceiling attachment installation bracket with the front of the template, fix the bracket by fastening the 3 screws through the holes, and connect the external incoming cables (video cable, controller cable and power cord) to the camera.
on the ceiling
3 installation bracket | 2 installation brackets |
fixing screws |
2. Attach the installation template to the ceiling where you want to install the camera, make a hole of at least 65mm in diameter, and 3 holes for fixing screws according to the marks on the template, and pull the external incoming cables out of the hole.
the external incoming cables
Notes
*Precautions before Attaching the Installation Template
installation cover
on the ceiling
template
on the ceiling
4. Assemble the camera, which should already have been attached to the product installation bracket, to the ceiling attachment installation bracket, facing forwards, and fix the camera with the supplied fixing screw.
on the ceiling
5. To complete installation, rotate the
•Installation Location: Check that the function and performance of the camera installed on the ceiling will not be adversely affected by the external environment, and that the ceiling can adequately support the weight of the camera.
•Installation Direction: Determine the main direction of the camera in advance and attach the template so that the front of the template is in line with the camera direction.
•Caution: Since there is a danger of the product falling during installation, take care not to allow anyone to stand below the installation area.
installation cover along the groove
of the ceiling attachment bracket, install cover and fix it.
26 | 27 |
