Samsung SPD-1000

5958

Product Structure Installation1 (Mini PTZ Dome Camera Control)

Product Structure and Installation

Contents

Main 10X Day & Night PTZ Dome Camera SPD-1000 Users Manual ENGLISH Page Features Various Auto Surveillances Warning/Attention/Special Mark Messages Day & Night 10X Zoom Lens with Auto-Focus Function Contents Precautions Components and Accessories 22 Installation 23 Part Names and Functions 10 ENGLISH Precautions Page Camera Initial Settings Setting Baud Rate Based on DVR Model Set the transmission mode using the ON/OFF of the Rear Panel SW2. Setting Communications Protocol Use the SW2 #1~#5 of installation bracket to set the communications protocol. Setting Transmission Mode Setting RS-485 Termination Rear panel Number Set the termination using the ON/OFF of #7~#8 of the Rear Panel SW2. Set the Camera ID using the ON/OFF of #1~#8 of the Rear Panel SW1. Setting Camera ID Switch Page Page Setting Termination Resistance Connect the controller and alarm input and output signal (main body port block) Auxiliary Video Out Port Components and Accessories Accessories Products Sold Separately Preparation for Cable Cable Connection Installation of SPD-1000 Installing the SPD-1000 on a Ceiling Installing the SPD-1000 Wall Mount Installing the Dome Housing (STH-1000PI) OSD Menu Organization Installing the Outdoor Housing (STH-1000PO) Preset settings are only possible within the OSD menu or by using the controller. PTZ Camera User Menu Settings Execution of OSD Menu : *It is recommended that the Digital Zoom should be set up before the preset operation. 1) Camera Setting Select the Camera Setting on the Main Menu screen to control camera settings Exposure Camera exposure can be controlled. White Balance Back Light AGC SSNR (Samsung Super Noise Reduction) Day & Night Others 2) Sequence Setting Sequence Setting Menu Page 3) P/T Setting Page 5150 Camera ID (Default setting is ON.) : Camera ID indication is set up. 4) OSD Setting Camera Name : Camera name is set up. P/T Setting Camera Name Camera Name [ ] Preset Number (Default setting is ON.) : Preset numbering is set up. 5352 Preset Name Sequence Status (Default setting is ON.) : Display of the Sequence Group is set up. Preset Name 5) Alarm Setting ON/OFF : Alarm is enabled in ON mode. Input 1, Input 2 : Alarm Input Mode/Priority/Method is set up. Enable : It can be determined whether to enable the alarm setting. Output : One of the 2 Alarm Outs and MD(Motion Detection) corresponds to each Alarm input. 6) Initialize 7) Status Page Installation 2 (Mini PTZ Dome Camera Control) Specifications Product Structure and Installation SPD-1000N SPD-1000P Specifications DECLARATION OF CONFORMITY